EZ2209¶
Product Profile¶
TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.
The Flexible microPlyer interpolation unit can provide 256 microsteps. Stallguard4™locked-motor test can provide an abnormal signal when the motor rotates abnormally. CoolStep™ current dynamic control can save 75% energy. The sinusoidal control can be perfectly realized even in the system with limited pulse frequency. Since stealthChop2 ™ ultra-quiet technology is widely used in 3D printing, the design of these components is also compatible with existing 3D printer electronic devices, and it eliminates the expensive cost of redesigning.The module has a standard step/dir interface, it's easy to use.
Features Highlights¶
- The motor is difficult to lose steps.
- Ultra-quiet mode；
- The module has a large-area cooling pad，it can lower the temperature when drive is working.
- The module can prevent the motor from shaking.
- The module support locked-motor test.
- The module support STEP/DIR and UART mode.
Basic Parameters¶
| Product size | 15.24mm*20.32mm |
|---|---|
| Power voltage（VM） | 4.75V---28V DC |
| Peak current | 2.8A |
| Current RMS | 2A |
| Microstep setting | 2、4、8、16（can be divided into 256 parts） |
| Max microstep | 256 |
| Operating mode | STEP/DIR or UART |
| SpreadCycle™ | highly dynamic motor control chopper |
| StealthChop2™ | ultra-quiet technology |
| MicroPlyer™ | microstep control |
| StallGuard4™ | locked-motor test |
| CoolStep™ | current dynamic control |
Dimensions¶
Interface Diagram¶
The direction of installing the EZ version driver to the new header is shown in the image below:
| J1 | Function | J2 | Function |
| 1 | (EN)Enable | 1 | (VM)Motor Supply Voltage |
| 2 | (SDI/CFG1)Data | 2 | (GND)GND |
| 3 | (SCK/CFG2)Clock | 3 | (B2) B Phase |
| 4 | (CSN/CFG3) Chip Select | 4 | (B1) B Phase |
| 5 | (SDO/CFG0) Data | 5 | (A1) A Phase |
| 6 | (DIAG) Locked-Rotor Detection | 6 | (A2) A Phase |
| 7 | (STEP) Pulse Input | 7 | (VIO) Logic Voltage |
| 8 | (DIR) Direction Input | 8 | (GND) GND |
Software Configuration¶
For details, please click:
https://bigtreetech.github.io/docs/TMC2208.html#software-configuration
Product Purchase Link¶
Purchase Link:
https://biqu.equipment/products/ez-drive-easy-driver-ez2209-ez5160-pro-v1-0?variant=39787466358882
If you have any issues with the product, please submit a support ticket.
https://biqu3d.com/pages/submit-a-ticket
Navigation:
BIQU Official Website： http://biqu3d.com
BIGTREETECH Official Website： http://bigtree-tech.com
Online Store： https://biqu.equipment
BIGTREETECH Official Group: https://www.facebook.com/groups/bigtreetech
Discord: https://discord.gg/hhZsV7zk